The Easybeat veterinary monitor performs seven functions. One of these functions is a temperature meter which is displayed regularly in the middle display. The temperature sensor used is a standard YSI400 medical temperature sensor used in most multi-parameter monitors. The temperature is displayed accurate to 0.1 degree C from 32.0C to 42.0C. To calibrate the temperature, a temperature calibrator or calibration plugs are needed. Press and hold the far left SET switch on power up. Note that the 5.7 displayed on startup is the current firmware version, and v5.7 is the latest version.
The display will show 32C= 609 (or a similar number). Select the 32C plug or set the temperature calibrator to 32C, and press the SET button to save the 32C calibration. The display will then show 42C= 114 (or a similar number). Press the SET Button again to save the 42C calibration.
The temperature calibration plugs and temperature calibrator are available now from Vetsens - see the lower part of the
Spare Parts page.
No comments:
Post a Comment